With the TR 60 LCD hot spray system you can process hot melt adhesives in the form of granules, pads or 43mm sticks as contactless spray application. The device can be converted for dot / bead application.The TR 60 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the TR 60 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hotmelt glue. The LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The TR 60 LCD hot-melt glue gun can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages ofdifferent shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings. The TR 60 LCD can be switched to dot- and lineapplication with an adapter. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.

Technical description:

Device weight


Power supply

230 V (50Hz), 2,09A
120 V (60Hz), 3,3A

Power consumption

230 V: 480 Watt 
120 V: 400 Watt

Protection classI, IP 30

Temperature control, display

Electronic, digital

Temperature limitationTemperatur monitor

Operating temperature

50-210 °C (on request max. 250°C)

Temperature constancy± 2°C

Heat-up time

ca. 3-10min.

Gross capacity

250 ml

Conveyor system

Air pressure

Operating pressure

0,5-6 bar

Length of electrical connection


Air hose length4 m
Length connection set3 m
Recommended melting goodsHot-melts granules, pillows, 43mm sticks

Technical Support

+36 28 920 918

Send message


+36 28 920 918

Send message